We recently came across some rustic oak flooring. It has a lot of knots and cracks in it, but it is perfect for making a river table. If you follow the steps laid out below, you can make a similar table for yourself!
Glue the rustic oak pieces to ¾" plywood and cut the board to the round tabletop shape.
Mix ~4 oz Tabletop Epoxy and brush it into all knot holes and across the surface/edges to minimize bubbles; let cure.
Build a ring form (CNC cut), line with Tyvek tape and seal seams with silicone. Mix Upstart Deep Pour at 2:1 (resin:hardener) — ~70 oz total — and add Forest Green metallic mica + Chameleon mica; mix thoroughly.
Fill knots first, then pour around the edge to create the epoxy edge. Use heat to pop bubbles; if the board floats, place a Tyvek-wrapped board + weight on top. Let cure for a couple days.
Remove from the form, flatten on the CNC, then round-over the edges with a ¼" router bit.
Sand (120 → 220 → 400), wipe with denatured alcohol.
Apply a small seal coat of Tabletop Epoxy (a few ounces) and let cure overnight.
Then apply a flood/gloss coat across the top and edges, pop bubbles with heat, trim cured drips with an orbital sander.
Install the legs and you’re done!
Put your beautiful table out to show off your hard work!
gives you a step-by-step guide on how to make a rustic epoxy table from vintage wooden flooring. Bundle the items from the project and receive a discount!
At Upstart Epoxy, we always put our customers first. We see you as family and want to help you in any way we can. Whether you need assistance with a project or just have a question, don't hesitate to reach out to us.
Upstart Epoxy has everything you need to get started with resin crafting. Our kits include all of the necessary supplies and instructions so you can get started right away. And if you ever have any questions, our customer service team is always happy to help.
Very satisfied with this product have used it in the past and will continue to use it. My order became damaged during shipment. They replaced it quickly. Good customer service would definitely recommend them.
The epoxy was great. Wasn’t follow directions. I’ll order again.
Had no problem what so ever .
Still teaching myself how to do this stuff but it's a very good product and if I have questions I know I can contact your company that's awesome!
Always mixes well, very few bubbles and dries hard asnd cleaves gladd
