Silicone Mold for Epoxy Resin Casting - 18" x 12" x 2" (RED)

Name: Silicone Mold for Epoxy Resin Casting - 18" x 12" x 2" (RED)
Brand: Upstart Epoxy
Price: 141.99 USD
Availability: InStock
Rating: 5.0 (7 reviews)

Rated 5.0 out of 5

Based on 7 reviews

$314.99 $141.99 Save 55%

Shipping calculated at checkout.

Questions? Call us at 844-247-3444

The Ultimate Time Saver ... Upgrade your love for resin art with time-saving efficiency. Speed up your setup versus traditional molds. Crafted from silicone, this flexible time-saver cuts down on setup, is a breeze to demold, and never leaks at the seams.

Make Your Masterpiece a Reality ... Looking for charcuterie board silicone molds for epoxy resin? Resin accessories to bring that cheese platter or serving tray to life? You've found them. At 18" x 12" x 2", this resin mold is perfect for trays and small table tops.

Use It Over and Over Again ... Treat it right and you'll get many years of uses from just one mold. Save hours of your time by crafting the smart way. While epoxy resin doesn't stick to silicone, we recommend using a mold release spray to enhance longevity.

BIG Cost Savings! Get more bang for your buck with an estimated cost of just $4 per use. Say goodbye to the hassle and expense of building your own mold for each project. Our platinum cured mold is designed to last for 50+ uses when stored in the supplied box and used with a mold release spray. Experience unprecedented cost savings and convenience with our top-notch mold solution.

Designed To Go The Distance ... Whether you are a woodworker, resin artist, or DIY enthusiast, our epoxy resin silicone molds withstand what you throw at them. A high heat resistance of up to 450F allows you to pop epoxy bubbles with a torch without damaging the mold.

Unleash Your Amazing Creativity ... This mold is great for epoxy resin and wood - and so much more. Experiment with concrete or plaster, and watch your creations spring to life from your imagination. A perfectly smooth interior means your art comes out just as smooth. Happy creating!

Storage & Care: Our mold includes a sturdy storage box for your convenience. Remember to always keep your mold flat and in a cool place when it's not in use. We recommend purchasing a mold release spray, available at most craft stores, to make casting easy and maintain the mold's durability for repeated use. Note: Mold release spray is not included in this kit.

Shipping times range from 2-4 business days and may be subject to carrier delays depending on the shipping address location, shipment method, and other factors.

FAQs

How long does it take to cure?

Deep Pour epoxy will cure in 72 hours.

How much mica powder do I add to the mixture?

Start with a small amount and gradually add more, until you achieve the opacity desired. It is not recommended that you use more than 3 grams of mica powder to each gallon of epoxy.

Can I use Deep Pour for a top coat?

Deep Pour was designed to be finished, therefore, we would recommend that after it has cured, it is covered with our Table Top epoxy, for a high-gloss finish, or that it be sanded and polished for a lower-gloss finish.

Do I need a seal coat?

Yes. We always recommend applying a seal coat when working with wood and other porous materials. The sealcoat will fill the small cracks, crevices and pores in the material, which will eliminate most air bubbles during subsequent pours.

I see that this product can only be poured at a depth of 2”. Can I layer it to achieve a greater depth?

Yes. You can pour additional layers of 2” at a time, once the previous layer has achieved a tacky cure (approximately 24 hours). At this point, the epoxy will have gelled but the surface will be tacky to the touch. For larger projects, limit your depth to 1 1/2” at a time.

Can I pour additional layers of 2” on epoxy that has been fully cured?

Yes, but the previous layer should be sanded lightly with a 220 grit sandpaper and then wiped down with a soft cloth to remove any debris.

Is the epoxy food safe?

Yes, it is! It complies with the standards listed in FDA 21CFR 175.300, for food contact.

Is the epoxy heat and UV Resistant?

Our epoxy products can withstand heat resistance up to120F. It is also UV resistant for indoor and covered patio use, but prolonged exposure to direct sunlight or for use in full-outdoor applications is not recommended.

happiness guaranteed

You come first. Always.

At Upstart Epoxy, we always put our customers first. We see you as family and want to help you in any way we can. Whether you need assistance with a project or just have a question, don't hesitate to reach out to us.

Everything you need

Hassle-free

Upstart Epoxy has everything you need to get started with resin crafting. Our kits include all of the necessary supplies and instructions so you can get started right away. And if you ever have any questions, our customer service team is always happy to help.

Buy Now

Write a Review

average rating 5.0 out of 5

Based on 7 reviews

5 Stars

7 Reviews
4 Stars

0 Reviews
3 Stars

0 Reviews
2 Stars

0 Reviews
1 Star

0 Reviews

100% of reviewers would recommend this product to a friend

Customer photos and videos

Open user-uploaded video and review in a modal

Open user-uploaded photo and review in a modal

7 Reviews

Sort by

Reviewed by Michael F., from United States

Verified Buyer

I recommend this product

Experience Level

Intermediate

Rated 5 out of 5

Review posted

Perfect Mold

Molds from upstart are the best in the industry. I received a 12x18 and used it to make 12 pours - one right after the other. The mold held up perfectly and there is no change in the texture of the mold. I highly recommended these molds - yes, they are more expensive - but they will last considerably longer than the cheap ones I’ve purchased before.